ShieldI/O Cape

Use Arduino shields with your BeagleBone or BeagleBone Black

ShieldI/O Cape

Posted by Angel on 2014-08-22T14:47:34-04:00

ShieldI/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software.

It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.

See http://www.impressx.com/en-gb/products/shieldio.aspx for more information.

Comments are not currently available for this post.