Inside-Outside Weather Station

This is a great weekend IoT project which uses the BeagleBone Green to display Temperature Humidity inside and outside your home and more..

Inside-Outside Weather Station

Categories: Intermediate

Inside-Outside Weather Station is a great weekend IoT project, which uses the  Seeed Studio BeagleBone Green to display Temperature Humidity inside and outside your home.

Here a quick video demo, of the features implement as part of the project

  • Display Temperature and Humidity inside your home using the Grove -Temperature and Humidity sensor -pro version
  • Get the Temperature and Humidity of you city to display on Grove LCD using
  • Get Weather conditions to display, so that you can plan what to wear or if you need to carry you umbrella before you head out in the morning.

caption (optional)It's raining here in Toronto todaycaption (optional)NoneNoneNone

  • Post the temperature and humidity values  to from a data collection endpoint
  • Create awesome dashboards using


Here are the Steps to follow 

3D Print the Case for BBG and Sensors

Download the STL files attached and print. 3D printing all the part could take about 2-3 hours based on your 3D printer settings.Here are some suggested setting

  • layer height – 0.3mm
  • Infill – 20%
  • PLA or ABS filament (in my case I choose to use white and green PLA)


Solder Bread-Boarding Wire to the Grove Connectors

Cut one of the grove connectors and solder bread-boarding  wire as shown in the picture below, also add heat shrink to prevent short circuits

In addition also solder wires to the 10 k POT


Install Python Library for the Temperature and Humidity sensor

To use the code below you will have to install a couple of libraries on you BeagleBone Green 

Connect a LAN cable to your BeagleBone and then connect the USB cable which comes with beaglebone green to your laptop , in my case I have dell laptop running Ubuntu.

I prefer SSH’ing into the BeagleBone ,instead of using cloud9 ide , use the following URL to access in you faviorite browser –

You can run all the command below using the cloud 9 ide, for example to get the ip address assigned to you BBG use 

root@beaglebone:~# ifconfig

Getting the IP address of the BeagleBone

Now you can use the ip address to SSH into your BeagleBone using

ssh root@ipAddress

run the following commands 

root@beaglebone:~#sudo apt-get update

sudo apt

install build

essential python

dev python


Once done download the awesome Adafruit DHT library from github and install it 

root@beaglebone:~#git clone

root@beaglebone:~#cd Adafruit_Python_DHT

#sudo python install

For more info refer the guide on the Adafruit learning system at

caption (optional)None

Test the Temperature and Humidity Sensor 

Connect the Sensor to
P8_11 pin
on BeagleBone  to the temperature and humidity sensor.

Run the following program to get the reading for temperature and humidity in your room

root@beaglebone:~/Adafruit_Python_DHT# cd examples/

root@beaglebone:~/Adafruit_Python_DHT/examples# python


Note : If you are using the same sensor as I am, you will have to uncomment the line in the file

sensor = Adafruit_DHT.AM2302

Install Python Libraries & get OpenWeathermap API Key

Run the following command to install the Open Weather library 

sudo pip install pyowm


Now create an account at
 to get the API key to use as part of the code


For more info refer 
pyowm wiki at

Getting Weather of your City 

Now download the code attached and run it (if you are using ssh use
and copy paste the code) 

Modify your city name and API key as part of the code 

root@beaglebone:~# python

Weather info in Toronto,Canada

In addition to post data to you will need to install Requests library

root@beaglebone:~# apt-get install python-requests


Complete the Circuit

Complete the circuit as shown in the circuit digram below

– Connect the Temperature and Humidity sensor to P8_11 

– Connect the LCD to the I2C pins on the BBG, 

  • SCL  to  P9_19
  • SDA to P9_20
  • connect the Vcc to the 5V pin (if you connect this to the 3.3v pin you will not see the text appear)

– Connect the POT to P9_33 and red wire to P9_32 and black wire to P9_34, here note the analog voltage on the BBG is 1.8V

caption (optional)

Add the BBG and Sensor to 3D Printed Parts

Now use your hot glue gun to add the sensors to the 3D printed parts

Also get a fancy potentiometer knob to add to the POT.

NoneUse hot glue to attach the sensors to the lidNoneNoneNoneNone

Print the image attached below and stick it the 3D printed part, just below the POT, you may have to adjust the values of the pot in you program below, run the program to determine the value of the POT  at each spot.

NoneNoneDownload this image and print it

Upload the Code to the BBG

Now download the code
attached below and run it (if you are using ssh use





and copy paste the code) 

  • Modify your city name 
  • API key from
  • And for posting to change the appName with you city/town

root@beaglebone:~/Adafruit_Python_DHT/examples# python

Testing the python code

Run the Python Program on start of BBG

To run the program at startup instead of SSH’ing in all the time, edit the Crontab file using

root@beaglebone:~# crontab -e

and add  the line below to the file, and use ctrl+X ,then Y-to save.

@reboot python /root/


Now when you reboot your BBG the program will auto start.

Create Dashboards on is intuitive, when it comes to creating dashboards using as your datasource, which in my case is (

Here are few screenshots

Adding DataSourceURL for the Data source from dweet.ioAdding Pane - Sparkline for Inside temperatureAdd Pane - gauge for wind speedNone

Comments are not currently available for this post.