PreRequisites
Debian and Ubuntu:
sudo apt-get install -y build-essential g++
wget -c https://raw.github.com/RobertCNelson/tools/master/pkgs/dtc.sh
chmod +x dtc.sh
sudo ./dtc.sh
Example
See more examples en examples directory.
#include "memGPIO.hpp"
const int REPEATS = 10const int DELAY = 250000int main () {
// Make a instance.
easyBlack::memGPIO myExample;
// Get PINs data for better performance.
easyBlack::memGPIO::gpioPin usr0 = myExample.getPin ("USR0"// Get PIN direction for better performance.
const unsigned char output = myExample.OUTPUT// Get PIN values for better performance.
const unsigned char low = myExample.LOWconst unsigned char high = myExample.HIGH// Set pin mode.
myExample.pinMode (usr0, output);
for (int x = 0// Turn USR0 LED on.
myExample.digitalWrite (usr0, high);
usleep (DELAY);
// Turn USR0 LED off.
myExample.digitalWrite (usr0, low);
usleep (DELAY);
}
// Reset USR0 LED trigger to default.
myExample.resetLEDPin0ToDefault ();
// Call the destructor.
myExample.~memGPIO ();
exit (EXIT_SUCCESS);
}
Digital and Analog I/O
- getPin (pinNumber)
- pinMode (pin, direction, [mux], [pullup], [slew])
- digitalRead (pin)
- digitalWrite (pin, value)
- resetLEDPin0ToDefault ()
- resetLEDPin1ToDefault ()
- resetLEDPin2ToDefault ()
- resetLEDPin3ToDefault ()
- resetLEDPinsToDefault ()
Comments are not currently available for this post.