BeagleConnect™ Freedom

Purchase
at

What is BeagleConnect™ Freedom?

With 2x mikroBUS connections, there are over 1,000 different add-on options. On-board sensors include temperature, humidity and light level. There’s even a battery charger to assist with battery-backed-up designs.

Based on the Texas Instruments SimpleLink™ CC1352P7 wireless microcontroller running Zephyr and Micropython, utilizing the 2.4GHz and sub-1GHz IEEE 802.15.4 wireless networks are made easy. Numerous additional wireless networking stacks are available from TI, including Wi-SUN and Amazon Sidewalk, enabling you to take your IoT designs wherever you might want to go!

BeagleConnect™ is a revolutionary technology virtually eliminating low-level software development for IoT and IIoT applications, such as building automation, factory automation, and home automation. Choosing BeagleConnect™ simplifies development by eliminating the need for layer of software development.  While numerous IoT and IIoT solutions available today provide massive software libraries for microcontrollers supporting a limited body of sensorsactuators and indicators as well as libraries for communicating over various networks, BeagleConnect™ simply eliminates the need for these libraries by shifting the burden into the most massive and collaborative software project of all time, the Linux kernel.

BeagleConnect™ Freedom features:

  • Includes enclosure and antenna, and
  • On-board sensors, a USB-to-UART bridge, battery charger, buzzer and user-programmable LEDs and button.

Note: The term BeagleConnect™ refers to a technology comprising of a family of boards, a collection of Linux kernel drivers, microcontroller firmware, a communication protocol, and system-level integration to automation software tools.

Sitara™ and SimpleLink™ are a trademarks of Texas Instruments. BeagleConnect™ is a trademark of the BeagleBoard.org Foundation.
Chipset Features

Texas Instruments SimpleLink™ CC1352P7 32-bit Arm Cortex-M4F multiprotocol and multi-band Sub-1 GHz and 2.4-GHz wireless MCU

  • Powerful 48-MHz Arm® Cortex®-M4F processor
  • 704KB flash program memory
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM
  • 144KB of ultra-low leakage SRAM with parity for high-reliability operation
  • Dual-band Sub-1 GHz and 2.4 GHz operation
  • Dynamic multiprotocol manager (DMM) driver
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, Bluetooth® 5.2 Low Energy, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

MSP430F5503

  • 16-bit RISC architecture, extended memory, up to 25-MHz system clock
  • 32kB flash
  • 4kB RAM
  • Full-speed USB
  • UART
  • I2C
  • 2x SPI
Board Features

Board

  • Type-C USB based serial console and firmware updates
  • 2x mikroBUS sockets to support Click boards from MikroE
    • SPI (2 chip selects)
    • 2x UART (one shared with MSP430)
    • I2C
    • 2x ADC
  • 2MB SPI flash
  • TI OPT3001 light sensor
  • TI HDC2010 humidity/temperature sensor
  • TI BQ2104 battery charger
  • 4 programmable LEDs
  • 1 programmable button
  • 1 reset button
  • 2 TAG-CONNECT JTAG debug for CC135P7 and MSP430F5503
  • On-board 2.4GHz chip antenna
  • U.FL connector for SubGHz antenna

Other

  • Plastic enclosure
  • Attached SubGHz antenna